DRI Compilation Guide
: Normal Installation and Configuration
Previous: Compiling the XFree86/DRI tree
Next: Testing the Server Without Installing It
9. Normal Installation and Configuration
Most users will want to install the new X server and use it in place
of their old X server.
This section explains how to do that.
Developers, on the other hand, may just want to test the X server
without actually installing it as their default server.
If you want to do that, skip to the next section.
9.1. Installation
Here are the installation commands:
su
cd ~/DRI-CVS/build/xc
make install
9.2. Update the XF86Config File
You may need to edit your XF86Config file to enable the DRI.
The config file is usually installed as
/etc/X11/XF86Config-4.
See the DRI User Guide for details, but basically, you need
to load the "glx" and "dri" modules and add a "DRI" section.
On the DRI web site, in the resources section, you'll find example
XF86Config files for a number of graphics cards.
These configuration files also setup DRI options so it's highly
recommended that you look at these examples.
The XFree86 4.x server can generate a basic configuration file
itself.
Simply do this:
cd /usr/X11R6/bin
./XFree86 -configure
A file named /root/XF86Config.new will be created.
It should allow you to try your X server but you'll almost
certainly have to edit it.
For example, you should add HorizSync and
VertRefresh options to the Monitor section
and Modes options to the Screen section.
Also, the ModulePath option in the Files
section should be set to /usr/X11R6/lib/modules.
9.3. Start the New X Server
The new X server should be ready to use now.
Start your X server in your usual manner.
Often times the startx command is used:
startx
DRI Compilation Guide
: Normal Installation and Configuration
Previous: Compiling the XFree86/DRI tree
Next: Testing the Server Without Installing It
|
